S-5! snow retention

Control the slide.
Keep the clean look.

We supply S-5! ColorGard snow-retention components for standing seam metal roofs. The system helps hold snow on the roof so it can release more gradually instead of sliding off in one heavy sheet.

S-5!ColorGard® 2.0
S-5! ColorGard 2.0 snow guards installed on a black standing seam metal roof at Ford Amphitheater
S-5! ColorGard 2.0 — installed on standing seamManufacturer photo from Ford Amphitheater. Photo: S-5!
Built for metal roofing

Snow control without drilling through the pan.

S-5! standing seam systems use profile-compatible clamps that grip the seam instead of putting fasteners through the flat roof panel. ColorGard adds a continuous crossmember across the roof, and optional snow clips help slow smaller amounts of snow and ice beneath the rail.

The clamp, clip size, row count, spacing and total quantity are selected from the actual roof information. A good order starts with the panel manufacturer and profile, seam height and spacing, roof slope, eave length, roof length and project location.

See ColorGard 2.0 from S-5!

Send this with the roof.

We’ll use the project details to organize the right components and confirm current pricing and availability.

  • Panel manufacturer and profile
  • Seam height, style and spacing
  • Roof slope, eave length and roof length
  • Job address or project city
  • Roof plan, takeoff or clear photos
Upload the roof information →

Read the ColorGard quote checklist →

What is in the system

More than a row of little blocks.

A continuous, engineered system spreads the snow load across the roof seams and keeps the finished roof looking intentional.

Profile-matched clamps

The clamp is selected for the exact standing seam. Correct fit matters for holding strength and for protecting the panel.

ColorGard crossmember

The continuous aluminum rail spans the seams and acts as the main snow-retention crossmember.

Color-matched face

A strip of matching roof metal can slide into the crossmember so the system blends with the panel color.

Project-specific layout

Rows, spacing and quantities depend on the roof geometry and snow-load calculation. There is no honest one-size-fits-all count.

S-5! questions

Before the parts are ordered.

Snow retention should be planned around the roof system, not guessed from a photo.

Does it require holes in the standing seam roof?

Compatible S-5! standing seam systems use clamps selected for the seam profile. The clamps grip the seam without putting fasteners through the flat roof panel. Final compatibility and installation must follow S-5! requirements.

Can the rail match the roof color?

Yes. ColorGard can use a ColorStrip made from matching roof material so the face of the crossmember blends with the metal roof.

How many rows do I need?

That depends on the roof. Roof dimensions, slope, panel profile, seam spacing and design snow load are used to calculate the row count and component quantities.

Can it be added to an existing roof?

Many standing seam roofs can accept clamp-mounted snow retention after installation. We still need to verify the panel profile, seam condition and project requirements before ordering.

Does Pristine install the system?

Pristine supplies the components and helps organize the material request. Installation is handled by your roofing contractor according to the approved layout and manufacturer instructions.

Add snow retention to the roof package.

Send the panel profile, roof dimensions and job location. We’ll help organize the S-5! components with the rest of the metal roofing materials.