How to request an S-5! ColorGard quote for a standing seam roof

Know what to send for a snow retention material quote, from identifying the seam to checking the rails, clamps and color strip on the parts list.

Start with the roof face, not a rail length

For a Green Bay or De Pere project, mark which roof faces are above the garage door, walk or patio you’re concerned about. Use the same labels on the roof plan and quote request. Two faces with equal eave lengths can have different slopes and different distances from eave to ridge. Treat those faces as separate lines on the request so your designer can confirm each layout.

Identify the seam before asking for clamps

If you’re ordering panels and snow retention together, include the panel quote or profile drawing. For an existing roof, send the manufacturer and panel model if known, plus the panel metal, gauge and seam spacing. If the profile is unknown, look for the old invoice or a panel sample. A close-up you already have may help identify what to verify, but a color or a photo from the driveway can’t confirm a clamp match.

Send the layout and bill of materials when you have them

The S-5! calculator uses job-specific information such as the slope, rafter length and design roof snow load to develop the layout and parts list. Use the design load confirmed for the project. A town name alone doesn’t provide that value. When you have the calculator output or a specified layout, attach it and label the roof faces it covers. If you don’t have those documents yet, flag the missing information so the quote can distinguish confirmed parts from items that are still open.

Check what’s on the ColorGard parts list

A quote that says only “snow rail” leaves a lot to confirm. Compare the materials against the approved layout, and ask which items are included, separate or still to be confirmed.

  • ColorGard crossmember type and quantity, plus how the quote accounts for splices.
  • Exact S-5! clamp model and quantity for the specified seam, with VersaClip connectors where called for.
  • SnoClip model and quantity if specified; these are separate from the seam clamps.
  • ColorStrip material and finish, if you want the rail face to match. Ask whether it’s included.
  • Tax, pickup or delivery, availability, and whether any items need to be ordered separately.

A two-face example for a quote request

Write “Face A: garage entrance; Face B: side entry” on your sketch. For each face, attach the measured eave length, slope length and pitch, then reference the matching layout or mark it as pending. Request separate parts totals if you’re pricing the two faces in stages. Pristine supplies the materials; use the confirmed design and quantities before placing the order.