Coverage runs across the roof
Pristine’s standard residential panel has 16 inches of coverage. That’s the width one panel contributes across the finished roof. It’s different from the width of the sheet before its edges are formed, and different from the length running up the slope.
A 24-foot-wide face: 18 coverage widths
On a rectangular face that measures 24 feet across the panel run, multiply 24 by 12 to get 288 inches. Divide by 16 and you get 18 full coverage widths. That number is a layout starting point. Edge details, partial panels and roof breaks can change the actual order.
An example panel list
Twenty-one panels at 13 feet 2 inches each contain 276.5 linear feet of panel. At 16 inches of coverage, that is roughly 369 square feet, or 3.69 roofing squares, before cuts. The quantity and cut lengths are what the shop needs; a square-foot total alone won’t tell it what to make.
Keep the roof faces separate
A hip or valley can give neighboring panels different lengths. Don’t apply a single rectangular-face calculation to the whole roof. Mark those faces separately and identify any end allowances that still need confirmation.
