Find the original profile first
For a repair or addition in Green Bay or De Pere, look for the original invoice, panel schedule, product drawing or a labeled leftover piece. The manufacturer and exact profile name give the supply desk something to compare. If the original paperwork is missing, a loose offcut that shows both formed edges is more useful than a photo of the whole roof. Send photos you already have or ask the person handling the roof work for a sample.
Match the edges as well as the width
Two panels can both have 16 inches of coverage and still use different locks. Pristine’s standard 24-gauge, 16-inch panel is a starting point for comparison. If a replacement has to connect to existing panels, confirm compatibility before ordering.
- Coverage width: the distance from one seam to the next across the installed roof.
- Seam height: the height from the flat part of the panel to the top of the seam.
- Lock and attachment: identify the profile from the records or show both formed edges on an offcut. Note the clip or attachment system if known.
- Metal type and gauge: use the original specification if available. Flag anything that still needs verification.
Compare the finish in daylight
Send the original color code and finish or coil label if you have it. Compare a current sample with a representative piece of the exposed roof in daylight. A real sample helps you see differences in gloss and texture, and older exposed paint may look different beside fresh material even when the original color name matches. Have the buyer approve the sample before ordering.
List the panels and trim separately
Send the confirmed finished cut length and quantity for each panel group. Flag every dimension that still needs to be checked. If you also need a rake or eave piece, give it its own line with a dimensioned sketch, finished length and the side that faces out. For an addition, say whether the new panels must connect to the old ones or will be on a separate roof face. That changes what has to match.
A two-panel request the supply desk can work with
For example: “Green Bay garage, west roof face. Two panels needed. Existing seams are 16 inches apart. Original profile unknown; I have a loose offcut with both edges. Finished cut lengths pending. Please confirm whether the edges match and show me the closest finish sample before we order. One rake trim piece may also be needed; sketch attached.” That gives the desk a clear way to separate what can be priced from what still needs to be verified.
